Tripods & Heads

Image unavailable

Coman DX428C Carbon Fiber Monopod

The Coman DX428CQ5 carbon monopod comes with the Coman Q5 Videohead, the tripod support MT10 and a transport bag. The height is from75,5cm up to 191cm. The 4 sections are fixed comfortable by sealed screw type lockings. On top of the Monopod is a switchable screw system so you have a 1/4″” and a 3/8″” screw on the bottom is has a 3/8″” Screw thread. The tilt of the head is adjustable between +90° and -75°. The built-in damping and dynamic balacing system make the videohead runinning smoothness. The included quickrelease plate is compatible with the Manfrotto 501 Quickrelease-System. The tripod-support Coman MT10 provides additional stability. It features a quick release system which can lock the Monopod in a vertical position, if you press it again you can move the monopod freely again. The Monopod can also be locked tight with a knob. It can revolve around the fulcrum in 360° for more convenience. The tripod support can be collapsed for transport purposes.

Image unavailable

Manfrotto 504HD Head with 546GB Tripod

The Manfrotto 504HD Head with 546GB 2-Stage Aluminum Tripod System combines the 504HD fluid video head with the 2-stage aluminum 546GB professional video tripod to create an ideal combo of affordability, stability, and smooth, precise control. The tripod features a 75mm half ball, and the sticks have a 75mm bowl for quick and secure leveling. This compact, versatile system was designed with independent video and DSLR shooters in mind, and it provides the level of ergonomics and support required by today’s small crews.

Image unavailable

Manfrotto 516 fluid head with 350MVB tripod

Tandem aluminium legs combine with a 100 mm half bowl attachment. Features include high tensile tubular aluminium legs with one step leg angle positioning system (21°). Legs can be adjusted within a 180° arc to other angle by using a mid level spreader 531SPRB and 530SPRB combined with a set of spike foot shoes 565 in case of unlevelled ground or by using a floor spreader code 165MV (included). Legs can be locked to any height by a quick lever leg locks and stainless steel fittings. Twin spiked feet are standard. Specifically designed for the latest DV camcorders used by documentary and industrial videographers.The 516 head is very compact and light but can support cameras up to 10 kg. The 516 is a cost effective high performance head equipped with fluid cartridges that provide continuous adjustable drag control. This system gives quite a wide range of friction control down to “zero drag-Inch and operates on both pan and tilt axis. Other important features of the head are: separate tilt and pan locking mechanism; a fixed counter balance spring of 7,5 kg load capacity at a center of gravity of 125mm; two telescopic pan handles; a bubble level. The head has been designed so it can be mounted on a flat base tripod with a 3/8-Inch female thread attachment or by attaching the ART 500BALL to the head base, allowing it to fi t a 100mm bowl.

Image unavailable

Manfrotto Head 504HD with 535 MPRO Tripod

The Manfrotto 535 Video Tripod is crafted out of carbon fiber. It is lightweight, durable and ideal for those long haul shoots where every session of shooting is punctuated with a re-jig of the entire set-up. The Manfrotto 535 has a weight of 2.3 kilos. Thus, carrying it is a lot more convenient compared to most others.

Image unavailable

Manfrotto MVH502A Fluid Head with 546GB Tripod

Includes the fluid video head (75mm half ball) MVH502A and the pro video tripod with ground spreader 546GB.The MVH502A is a professional video head and has a 75mm half ball video tripod mount. It’s designed for use with HDSLR cameras and latest interchangeable lens cameras. It offers professional features such as high-performance variable fluidity and a counterbalance setting designed to match the weight of the most popular cameras and their accessories as external monitors, lights or microphones. The 502 head has a pre-set counterbalance of 4kg (8.8 lb.), but is able to support equipment of up to 7kg (15.4 lb.). The 502 head has two Easy Link connectors to allow an external monitor or other accessory equipment to be fitted directly on the head. The 546GB is a two-stage, extremely rigid, stable tripod. Able to carry loads up to 20kg (44.lb). The 546GB has a die cast aluminum crown with a built in 75mm bowl. The tripod’s telescopic ground-level spreader helps set leg angles accurately. Leg locks are secure and reliable, and spiked feet with rubber overshoes are provided for solid grounding on both uneven terrain and smooth floors. The tripod can be used with various dollies. Supplied with padded carrying bag. Specification Center Of Gravity 2.16 in Closed Length 32.68 in Counter Balanced Weight 8.82 lbs. Maximum Height 66.14 in Minimum Height 17.32 in Safety Payload Weight 15.43 lbs. Weight 12.13 lbs.

Image unavailable

Manfrotto MVH502AH Fluid Head with 190XPR0B

The Manfrotto 502 Pro Video Head with Flat Base (3/8″-16 Connection) is a full-featured professional head that represents an advance over the popular 501HDV, with sturdier construction and featuring Manfrotto’s bridging technology (inherited from the 509HD and 504HD heads). This head is designed for executing cinematic moves with compact camcorders and DSLR video cameras. The 502HD comes in two versions: the ‘AH’ flat-base version and the ‘A’ ball-base version, which is separately available. The 190XPROB is an excellent small tripod for product, close-up and copy work. It is four feet (122cm) tall with legs fully extended, plus the height of the head you use. The center column adds more height, 9.5 inches (24cm), for a total of 57.5 inches (146cm).

Image unavailable

Midas Photo Video Monopod

3 way aluminium monopod, spiked feet, 4 section, fluid head, Max 1680mm, Min 620mm, Net weight 770g. Excellent for video cameras and still cameras.

Image unavailable

OConnor Ultimate 2560 Fluid Head

The Ultimate 2560 Fluid Head from OConnor is designed for use with the current crop of digital cinema cameras. Weighing less than 8 Kg, 2560 is capable of supporting camera payloads up to 30 Kg at a 15.24 cm center of gravity above the platform, making it well suited for cameras such as the ARRI Alexa in a portable configuration or any lightweight digital cinema camera in a full studio configuration. The head comes packaged with both a Mitchell base and a 150mm ball base adapters with tie-downs for expanded tripod compatibility. It also comes with a large Euro-style quick release for rapid mounting and dismounting of large camera rigs, a pan handle, and a pan handle extension.

Image unavailable

OConnor Ultimate 2575D Fluid Head

The OConnor Ultimate 2575D Fluid Head Package includes the Ultimate 2575D Fluid Head, Euro Style Quick Release, Pan Handle, Pan Handle Extension, Mitchell Base and Tiedown, and 150mm Ball Base and Tiedown. The Ultimate 2575D Fluid Head includes the sinusoidal counterbalance system for true, accurate balance at any point in the tilt range and holds cameras up to 90 lb. It provides stepless, ultra-smooth pan and tilt fluid drag for improved control and stability for film-style shooting. The 2575-120 Large European Quick Release with 120mm camera mounting plate is for use with the OConnor 2060, 2575C and 2575CV fluid heads. The Mitchell base adapter allows mounting all Oconnor’s Ultimate Series fluid heads (except Ultimate Digital 50-200 head) on Mitchell base tripods. The 08402 Mitchell Base Tiedown is the five-lobed retaining nut used with gear and fluid heads with Mitchell threaded post mounts. The 150mm ball base adapter allows mounting the Ultimate 2060, 2575C and 2575CV on 150mm bowl tripods. Requires 150mm ball tiedown. The 150mm Tiedown is for the attachment of 150mm bowl-mounted fluid heads to OConnor tripods with 150mm receivers.

Image unavailable

Oconnor Ultimate 1030DS Fluid Head

The smallest in OConnor’s Ultimate range of fluid heads and features OConnor’s stepless counterbalance system as well as ultra-smooth pan and tilt fluid drag designed for cine-style shooting. • A new collapsible counterbalance crank handle makes balancing the payload easier. The new 1030 has all controls on the camera operator’s side of the head (on the left or ‘smart’ side) and features platform scales and two rosette handle mountings on either side of the head. • OConnor’s patented fluid drag system allows extremely quick pan movements from one position to another, recovering instantly without any springback. • You can set up easily in low light conditions using the illuminated bubble level.

Image unavailable

Ronford Baker 10001 Heavy Duty Tall Tripod

Ronford-Baker Tall Heavy Duty Aluminium tripod with a Mitchell Base supplied as standard. The Tripod has a maximum height of 68″ (173cm) with the legs fully extended.

Image unavailable

Ronford Baker 10002 Heavy Duty Short Tripod

This tripod from Ronford-Baker is a Short Heavy Duty Aluminium tripod with a Mitchell Base supplied as standard. The Tripod has a maximum height of 33.5″ (85cm) with the legs fully extended. Key features: Mitchell Base Heavy Duty Tripod Aluminium Construction Maximum height of 33.5″ Polished and anodized tubes Stainless Steel spikes to feet Durable and lightweight

Image unavailable

Sachtler ACE M Fluid Head System

With its payload range of 0 to 4 kilograms (0 to 8.8 lbs), Ace is the ideal camera support for smaller HDV camcorders and DSLR cameras. The 5-step counterbalance (+0) makes fast counterbalancing of the camera set-up easy. With 3 vertical and 3 horizontal grades of drag (+0), the new patented SA dragTM enables fine adjustment for precise panning and tilting. The new Sachtler Ace fluid head has a tilt range of +90° to -75°. For Ace, a glass fiber reinforced composite material was chosen, which makes the new 75mm fluid head especially light and offers a comfortable and non-slip surface feel.

Sachtler Video 18P Fluid Head With Mid-Level Spreader Tripod System

Image unavailable

Secced SC-Video 10/100VP Head+SC-ENG/CF Tripod

The SC-Video-10 /100VP embodies 5 steps counterbalancing mechanism and the adjustable drag assemblies for pan and tilt motions. The balance system is easily adjusted by a knob on the right-hand side of the head. The drag system ensures smooth movement of the camera about pan and tilt axes and fits with control knobs to adjust the drag setting. Friction brakes on each axis allow the head to be locked at any position. The camera is attached to the head by means of a Quicklock wedge fitted into camera plate of the head. The SC-ENG/CF 100M features a fast clamping mechanism for locking the leg. The rubber foot, dolly and floor spreader are available as accessories. The 100mm bowl base is an ideal support for 100mm fluid head of all brands.